Skateboard which wheels

The B scale is a different way of measuring the same thing, and is mainly used for the hardest wheels on the spectrum. The conversion is simple, the B scale reads 20 values below the A scale:. Note to Beginners: It is smart to stick with something around A. Anything above 98A will perform well in the street or in the park. Anything softer will probably slow you down. However, if you wish to cruise around on your skateboard and are not much interested in learning tricks, a softer wheel will work well for you.

For a good cruising wheel, choose something between 78A and 90A. Back to Guide. Deck Width. Deck Shape. Deck Concave. Truck Width. Truck Height. Wheel Size. For high trucks without pads, we recommend skateboard wheels up to 58 mm. Another thing to keep in mind when purchasing skateboard wheels is the level of rigidity.

The higher the number, the harder the wheels. Since the A Scale can only accurately describe wheels up to a hardness level of A and gets imprecise with high values, brands like Bones Wheels use an additional scale to more precisely describe wheels with a durometer of A — A. These wheels are substantially harder than the wheels on the A scale. Soft skateboard wheels have more grip, are quieter, and absorb irregularities in the ground better than hard wheels. Because of this, they slide less than hard wheels and are a bit slower.

Below you can find out which individual degree of hardness is most suitable for you. Soft wheels are suitable for very rough surfaces and for cruiser and filming boards because they absorb ground unevenness and minimize noise.

These wheels have a lot of grip and are slower in comparison to hard wheels. Powerslides are much harder to execute with soft wheels.

Skateboard wheels with a hardness from 93A to 95A are slightly harder and faster than soft wheels but still have a good grip. If your street spots have very rough ground, but you still want to street skate, or if you simply want to relax and cruise through the city, then wheels within this range are right for you.

Skateboard wheels in the durometer range of 95A — 99A are the perfect wheels for every beginner. Very hard skateboard wheels in the rage of 99A — A and more as well as 83B — 84B Bones Wheels are the perfect wheels for experienced skaters. Due to their extreme hardness, they slide fast, accelerate quickly, a can reach very high top speeds. For this reason, they are ideally suited for technical skateboarding. On rough or very slippery surfaces, however, very hard wheels can be unpleasant to skate on.

After the diameter and hardness level, selecting the right contact patch is the last criterion you have to do decide on when selecting the right wheels for your skateboard. Slim Wheels and Basic Wheels differ fundamentally in that Basic Wheels have a contact patch of mm , where as the range of Slim Wheels is mm. Because of this, the friction is minimized when skating and sliding, making narrow wheels particularly suitable for technical skating.

Fun Fact: All info about the diameter, hardness, and contact patch of a wheel can be found in our item descriptions. Here, you can find out how to get the bearings into the wheels and how to mount the wheels on your trucks.

Your wheels should be neither too loose nor too tight on the axle. Try to give your wheels just enough space for clearance. This is how you get bearings out of the wheel. If your wheels are worn out, but your bearings are still in working order, you can get them out from your wheels in a few easy steps.

Like this, you should be able to pry the bearing from the wheel core. It will take a little muscle though. Every skater has his or her own skating preferences.

To avoid one-sided wear on your wheels, you can regularly swap the position of your wheels so that they wear evenly. Take the side of the wheel that used to be facing outwards, and face it inwards. That is, you swap the front right wheel with the rear left and the back front left wheel with the rear right. There are several reasons as to why your skateboard wheels might not rotate properly.

If that is the case, unscrew the wheels and clean the parts with a damp cloth. Learn how to properly clean your bearings in the Bearings Wiki. Unfortunately, there is hardly any information about the urethane compounds used by the various manufacturers. Therefore, it is possible that wheels with the same specifications as hardness durometer , diameter, riding surface, etc.

If you still have questions or suggestions, you can leave a comment under this post, send us an email through our contact form, or ask our customer service team for advice in choosing the optimal wheels. This size seems to provide most skateboarders with the perfect blend of speed and acceleration. This really is the Goldilocks zone of wheel size choice. Perfect for most skaters starting out and also the most popular choice for seasoned skateboards. Not too big, not too small, not too heavy, not too light.

Just right! If you are confidant on your board and want a little more speed this is the size for you. This size is also a good go-to if your local park is older, rough and weathered as it will absorb the bumps and cracks a little more.

Once you get to this sized wheel there are a few things to consider. How you set up your board will determine what you need. What happens when you increase the size of your wheel? The distance between your wheel and the deck decreases.

This means more chance of wheel bite and getting pitched off your board. A riser pad will increase the distance between your wheel and deck. It will mean you can take on a tight carve or really hook into a turn with confidence and without injury.

Bust out the big guns. These wheels are the biggest in the standard street and park wheel range. Generally used by very well seasoned skateboarders and the preferred size for many bowl and vert ramp skaters. Some street skaters do like this size too, but they are the few not the many. This size will give you maximum speed in bowls, vert ramps and larger transitioned skateparks. The bigger diameter also handles protruding pool coping much more comfortably than a smaller wheel.

It is a heavier wheel and increases you center of gravity noticeably. Conical skateboard wheels have a wider contact area and sidewalls that cone inwards very slightly.

This can be useful for skating ramps as they allow skateboarders to lock into coping easier. Radial skateboard wheels are the opposite of conical. They have more robustly bevelled edges than standard shaped wheels alongside a greater contact area. This provides more surface between wheels and surfaces providing a smoother ride even in the hardest of durometers. Sometimes the core will resemble spokes within a bicycle wheel whereas others may be a more subtle. These wheels have a very low durometer to provide a smooth ride.

They are not usually intended for skateboarding that involves tricks and can be found on vinyl cruisers, old school setups and longboards. What are skateboard wheels made from? Skateboarding wheels are made from polyurethane. Until the development of urethane wheels in the late s skateboarders relied on using roller-derby or clay wheels to keep them rolling. After the introduction of urethane it quickly became the industry standard material for manufacturing skateboard wheels and the rest is history!

What are flatspots? Flatspots are literal flat areas of a wheel that develop through use.